Home > Products > CupLock System Scaffold

CupLock System Scaffold

Involving a workforce in building construction is all getting safer day after day. Thanks to the use of Cuplock System Scaffolds from the house of Scaffold Supply. You don’t require bolts, nuts or wedges to lock it as these scaffolds come with quick locking facility. Also, it comes with quick fastening facility which eases the task of setting up. These are well optimized for working at heights. Cuplock System Scaffolds are viable in a range of applications such as continuous façade, birdcage access, staircase access, circular scaffolding etc. Hence your construction works are all set to get eased up and safer to ensure you build the best.
  • CupLock Board Brackets

    CupLock Board Brackets

    Tighten your scaffolds and ensure 200 percent safety of all your team members and let them raise the benchmark for productivity with the range of Cuplock Board Brackets from the house of Scaffolds Supply. These come with high tensile strength and are highly durable. Scaffolds Supply offers an array of Cuplock Board Brackets for different purposes such as vertical and horizontal alignments. All these come with hot dip galvanized finish and are made of high strength low alloy structural steel. Hence reliability, safety and quality are guaranteed.
  • CupLock Braces

    CupLock Braces

    Add more strength and durability to your scaffolds with the range of Cuplock Braces from Scaffolds Supply. These braces are of superior quality and come with a hot dip galvanized finish. Also, they are made of high strength low alloy structural steel. Moreover, these braces can be fixed with ease and will eventually let your team to get on to the work and complete it on time.
  • CupLock Casters, Adapters and Bases

    CupLock Casters, Adapters and Bases

  • CupLock Horizontal Trusses

    CupLock Horizontal Trusses

    Span your scaffold to long distances with the Scaffolds Supply range of Cuplock Horizontal Trusses. Here you find a variety of Trusses that can increase efficiency and reduce the number of property used. All of the Trusses you find here are cost effective and helps one understand where to give support to spread load evenly. Most importantly, it is simple in design to ease setup operations.
  • CupLock Horizontals / Ledgers

    CupLock Horizontals / Ledgers

    Enable desired grid shape for the scaffolding and make it more comfortable for all of your team members indulged in field work. The nature of Cuplock Ledger allows it to fit perfectly to the supporting material and offers superior grip to the Scaffolds. The array of Cuplock Horizontals/Ledgers you find below is among the simple ones to assemble and reconstruct. Hence the highly time consuming activities are getting way simplified nowadays.
  • CupLock Verticals

    CupLock Verticals

    Build a base structure, make a formwork and improve your field work team’s productivity with Scaffolds Supply’s range of Cuplock Vertical Standards. These are manufactured utilizing finest raw materials and modern machines. All of these have a hot dip galvanized finish and is made of a high strength low alloy structural steel.
Sort By:
Page of 2
Cuplock 1 Board Bracket Cuplock 1 Board Bracket

Board brackets are used at the edge of a scaffolding to extend the reach
or extension off of any side of the scaffolding where sunshade comes.

Our Price: $6.75
1'-10 1/32" CupLock Horizontal Ledger 1'-10 1/32" CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $8.20
2'-7 1/32" CupLock Horizontal Ledger 2'-7 1/32" CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $10.25
3' CupLock Horizontal Ledger 3' CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $11.60
2'11" CupLock Horizontal Ledger 2'11" CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $11.60
1' CupLock Vertical (0.5M) 1' CupLock Vertical (0.5M)

Standards are the vertical members of Cuplock scaffolding. They provide the vertical support for scaffolding.

Our Price: $12.75
3'-6" CupLock Horizontal Ledger 3'-6" CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $13.20
1.5 inch Hollow Adjustable Screw Jack (21"L) 1.5 inch Hollow Adjustable Screw Jack (21"L)

Use: screw a starting base for a scaffold. It has an adjustable height to allow for compensation on uneven levels, so that a level scaffold is always attainable. Any scaffold base should always be placed atop mudsills that are on proven solid ground.
Standard Hollow Galvanized Screw Jack used in Cuplock and Ringlock Scaffolding.

Our Price: $13.50
1.5 inch Hollow Adjustable Screw Jack (24"L) 1.5 inch Hollow Adjustable Screw Jack (24"L)

Use: screw a starting base for a scaffold. It has an adjustable height to allow for compensation on uneven levels, so that a level scaffold is always attainable. Any scaffold base should always be placed atop mudsills that are on proven solid ground.
Standard Hollow Galvanized Screw Jack used in Cuplock and Ringlock Scaffolding.

Our Price: $13.95
4' CupLock Horizontal Ledger 4' CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $14.65
4'1" CupLock Horizontal Ledger 4'1" CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $15.05
1.5" Diameter Adjustable Swivel Jack 1.5" Diameter Adjustable Swivel Jack

The screw jack is used as a starting base for a scaffold where the supporting surface of the scaffold is on a slope. This Galvanized Swivel Base Jacks is the standard screw leg for Cuplock and Ringlock Scaffolding.

Our Price: $16.65
Cuplock Clamp On Leg Cuplock Clamp On Leg

Clamp on leg to be used to take out one additional vertical between two verticles.

Our Price: $17.15
4'11" CupLock Horizontal Ledger 4'11" CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $17.50
5' CupLock Horizontal Ledger 5' CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $17.57
3'-3" CupLock Vertical (1.0M) 3'-3" CupLock Vertical (1.0M)

Standards are the vertical members of Cuplock scaffolding. They provide the vertical support for scaffolding.

Our Price: $20.05
5'11" CupLock Horizontal Ledger 5'11" CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $20.45
6' CupLock Horizontal Ledger 6' CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $20.50
Cuplock 2 Board Side Bracket Cuplock 2 Board Side Bracket

Board brackets are used at the edge of a scaffolding to extend the reach
or extension off of any side of the scaffolding where sunshade comes.

Our Price: $21.75
25" Deck Adapter 25" Deck Adapter

Deck adapter is used to hold the ledger / horizontals which is fitted at top. Example of use: In cuplock scaffolding system to create dance floors.

Our Price: $24.00
7' CupLock Horizontal Ledger 7' CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $24.40
Cuplock Caster Adapter Cuplock Caster Adapter

The caster adapter is used as a base connection point to a caster and provides a base rosette to begin scaffold construction. This adapter is used only for Cuplock Scaffolding. This will connect to a 12" system caster to enable your scaffold tower to roll.

Our Price: $24.85
8' CupLock Horizontal Ledger 8' CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $27.40
Cuplock 3 Board Side Bracket Cuplock 3 Board Side Bracket

Board brackets are used at the edge of a scaffolding to extend the reach or extension off of any side of the scaffolding where sunshade comes.

Our Price: $28.05
8'2" CupLock Horizontal Ledger 8'2" CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $28.05
7' CupLock Swivel Face Brace 7' CupLock Swivel Face Brace

Swivel face braces are used for the lateral bracing Cuplock scaffolding. Face braces can also be used as obtuse angle mid rail and top or hand guard rails in conjunction with TECHNOCRAFT stair system.

Our Price: $28.25
4'-11" CupLock Vertical (1.5M) 4'-11" CupLock Vertical (1.5M)

Standards are the vertical members of Cuplock scaffolding. They provide the vertical support for scaffolding.

Our Price: $29.75
8' CupLock Swivel Face Brace 8' CupLock Swivel Face Brace

Swivel face braces are used for the lateral bracing Cuplock scaffolding. Face braces can also be used as obtuse angle mid rail and top or hand guard rails in conjunction with TECHNOCRAFT stair system.

Our Price: $29.90
9' CupLock Horizontal Ledger 9' CupLock Horizontal Ledger

Ledgers are the horizontal members of Cuplock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $30.45
Cuplock Adjustable Caster Adaptor Cuplock Adjustable Caster Adaptor

The adjustable caster adapter is used as a base connection point to a 12" System Caster for mobile cuplock towers. It allows for 18" adjustability as well as a base rosette to begin scaffold construction.

Our Price: $30.50