Home > Products > RingLock System Scaffold

RingLock System Scaffold

Reduce the humongous time involved in installation of scaffolds to raise the high rises with Ringlock System Scaffold. The extremely flexible nature of Ringlock System allows you to speed up the process and complete it in just few minutes. Thanks to its pre-fabricated body. Moreover, this process offers more flexibility and can cater complex geometries. Most importantly, this is the most cost effective measure for businesses compared to its counterparts. Ease of installation, flexibility and cost effectiveness has allowed businesses to increase productivity and deliver with quality. Also, Ringlock Scaffold can withstand extreme environmental conditions both onshore and offshore.
  • RingLock Board Brackets

    RingLock Board Brackets

    Raise the productivity benchmark of your team with Scaffold Supply’s range of Ringlock Board Brackets. Scaffolds Supply’s array of Ringlock Board Brackets are well versed in terms of durability and come with high tensile strength. It can be used for both vertical and horizontal alignments. All these come with hot dip galvanized finish and are made of high strength low alloy structural steel. Hence there is no question of reliability, safety and quality. Choose the right one for your Scaffold from the below range.
  • RingLock Casters, Adapters and Bases

    RingLock Casters, Adapters and Bases

  • RingLock Diagonal Braces / Bay Braces

    RingLock Diagonal Braces / Bay Braces

    Avail the highly durable Ringlock Diagonal Braces / Bay Braces from the house of Scaffolds Supply and ensure safety of the team working on field. The hot dip galvanized finish and high strength low alloy structural steel is the reason behind the added strength and durability. Most importantly, these can be fixed with ease and reduce the time spent on fixing something else. Choose the right one for your Scaffold from the below range.
  • RingLock Girders & Trusses

    RingLock Girders & Trusses

    Spread your Scaffolds length horizontally with Ringlock Girders and Trusses from the house of Scaffolds Supply. The simple design eases the setup operations and reduces the time involved. Scaffolds Supply’s range of Ringlock Girders & Trusses helps one understand where to offer support to spread load evenly. It assists in increasing efficiency and is highly cost effective. Hence in all ways, the range of Scaffolds Supply’s Ringlock Girders & Trusses is the right ones to support your Scaffolds at field. Choose the right one for your Scaffold from the below range.
  • RingLock Horizontals / Ledgers

    RingLock Horizontals / Ledgers

    Make a grid shaped Scaffold and creates an easy work environment for your team on the field with Scaffolds Supply’s Ringlock Horizontals / Ledgers. The nature of Ringlock Horizontals / Ledgers is to give superior grip to the Scaffold by fitting perfectly. Hence Ringlock Horizontals / Ledgers are among the essential components you require. Choose the right one for your Scaffold from the below range.
  • RingLock Standard Verticals

    RingLock Standards / Verticals With Bolted Spigot

    Build a base and take it higher and higher to touch the skies with Ringlock Standards/ Verticals with Bolted Spigot from the house of Scaffolds Supply. This is an amalgamation of finest raw materials available and modern machines to ease the setup of a tall Scaffold. It comes with a hot dip galvanized finish and made of high strength low alloy structural steel.
  • RingLock Miscellaneous Parts

    RingLock Miscellaneous Parts

Sort By:
Page of 3
RingLock Twin Wedge - 6" RingLock Twin Wedge - 6"

Twin wedge is used to connect two verticals when required

Our Price: $6.50
RingLock Starter Base Collar RingLock Starter Base Collar

The starter base collar is connected at one of the many bases i.e., base plate, screw jack or swivel jack and provides a base rosette to begin Scaffold construction.

Our Price: $7.40
12" RingLock Side Bracket (1-Board) 12" RingLock Side Bracket (1-Board)

Ringlock Side brackets are used at the edge of a scaffolding to extend the reach or extension off of any side of the scaffolding where sunshade comes.

Our Price: $8.10
1' RingLock Horizontal / Ledger (0.305M) 1' RingLock Horizontal / Ledger (0.305M)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $9.35
1'4" RingLock Horizontal / Ledger (0.40M) 1'4" RingLock Horizontal / Ledger (0.40M)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $10.05
0.5 Meter RingLock Vertical 0.5 Meter RingLock Vertical

Standards are the vertical members of Ringlock scaffolding. They provide the vertical support for scaffolding.

Our Price: $11.30
2' RingLock Horizontal / Ledger (Imperial Size) 2' RingLock Horizontal / Ledger (Imperial Size)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $11.55
2'2" (.65m)  RingLock Horizontal / Ledger 2'2" (.65m) RingLock Horizontal / Ledger

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $11.60
2'5" (0.75 Mtr)  RingLock Horizontal / Ledger 2'5" (0.75 Mtr) RingLock Horizontal / Ledger

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $11.70
2'11" (0.88M)  RingLock Horizontal / Ledger 2'11" (0.88M) RingLock Horizontal / Ledger

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $12.05
2'4" (.73m)  RingLock Horizontal / Ledger 2'4" (.73m) RingLock Horizontal / Ledger

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $12.60
Ringlock Clamp On Leg Ringlock Clamp On Leg

Clamp on leg to be used to take out one additional vertical between two verticles. This clamp on leg is only to be used with Ringlock Scaffolding.

Our Price: $12.75
3'3" RingLock Horizontal / Ledger (Imperial Size) 3'3" RingLock Horizontal / Ledger (Imperial Size)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $13.50
1.5 inch Hollow Adjustable Screw Jack (24"L) 1.5 inch Hollow Adjustable Screw Jack (24"L)

Use: screw a starting base for a scaffold. It has an adjustable height to allow for compensation on uneven levels, so that a level scaffold is always attainable. Any scaffold base should always be placed atop mudsills that are on proven solid ground.
Standard Hollow Galvanized Screw Jack used in Cuplock and Ringlock Scaffolding.

Our Price: $13.95
3' RingLock Horizontal / Ledger (Imperial Size) 3' RingLock Horizontal / Ledger (Imperial Size)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $14.05
0.5M RingLock Vertical Mid Transom 0.5M RingLock Vertical Mid Transom

The Vertical Mid Transom fits vertically between two ledgers positioned 0.5M apart and attaches with half couplers. When attached in the middle between two ledgers the maximum point load capacity is increased.

Our Price: $15.15
RingLock Leg Lock / Suspended Bracket RingLock Leg Lock / Suspended Bracket

The Leg Lock or Suspended Bracket, used in pairs, is designed to attach to the bottom rosette of the top Standard and to the top rosette of the bottom Standard. This joins the standards together in preparation for suspended or lifted scaffold applications.

Our Price: $15.60
3'-6" RingLock Horizontal / Ledger (Imperial Size) 3'-6" RingLock Horizontal / Ledger (Imperial Size)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $16.15
3'10" (1.15m) RingLock Horizontal / Ledger 3'10" (1.15m) RingLock Horizontal / Ledger

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $16.50
1.5" Diameter Adjustable Swivel Jack 1.5" Diameter Adjustable Swivel Jack

The screw jack is used as a starting base for a scaffold where the supporting surface of the scaffold is on a slope. This Galvanized Swivel Base Jacks is the standard screw leg for Cuplock and Ringlock Scaffolding.

Our Price: $16.65
4'10" RingLock Horizontal / Ledger (1.484 Mtr) 4'10" RingLock Horizontal / Ledger (1.484 Mtr)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $16.70
4'3" RingLock Horizontal / Ledger (1.286 Mtr) 4'3" RingLock Horizontal / Ledger (1.286 Mtr)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $17.70
4' RingLock Horizontal / Ledger (Imperial Size) 4' RingLock Horizontal / Ledger (Imperial Size)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $18.15
5' RingLock Horizontal / Ledger (Imperial Size) 5' RingLock Horizontal / Ledger (Imperial Size)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $18.75
1 Meter RingLock Vertical 1 Meter RingLock Vertical

Standards are the vertical members of Ringlock scaffolding. They provide the vertical support for scaffolding.

Our Price: $19.00
5'-2" RingLock Horizontal / Ledger (Imperial Size) 5'-2" RingLock Horizontal / Ledger (Imperial Size)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $19.95
RingLock Caster Adapter RingLock Caster Adapter

The caster adapter is used as a base connection point to a caster and provides a base rosette to begin scaffold construction

Our Price: $20.00
6' RingLock Horizontal / Ledger (Imperial Size) 6' RingLock Horizontal / Ledger (Imperial Size)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $21.50
6'9" RingLock Horizontal / Ledger 6'9" RingLock Horizontal / Ledger

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $21.80
7' RingLock Horizontal / Ledger (Imperial Size) 7' RingLock Horizontal / Ledger (Imperial Size)

Ledgers are the horizontal members of Ringlock scaffolding. They provide horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails

Our Price: $25.10